Hebben jullie een oplossing voor het uitlezen van de P1-meter (gas/Electra).
Het gaat om twee aspecten.
1 een ‘mooie’ grafische weergave van de meterstanden en vooral het actuele verbruik cq. teruglevering.
2. Management van verbruikscentra om inzicht te krijgen inneemt verbruik in relatie tot (terug)levering.
Support van slimme meters is op dit moment beperkt. Door gebruik te maken van de Dutch Smart Meter plugin en een Multi Value control in HomeWave kan je 3 waarden uit je meter laten zien. Er is nog geen mooi vormgegeven metertje of grafische weergave van historische data.
Hi Jack, try and re-link that control to a device on your 3rd Vera: highlight the control and click the Link (chain) button. Refresh the list, then select the right device from the list. If that doesn;t help, please delete the 3rd Vera from Settings and add it again.
I have been using HomeWave to control my Vera for a while now, and it has been great. I’ve just added a Vera3 to a 2nd home and would like to use HomeWave to control this device as well. I found the settings to add IP address, etc. for second vera, but couldn’t find any instructions for how to add controls for devices from multiple Veras. Any pointers?
Hebben jullie een oplossing voor het uitlezen van de P1-meter (gas/Electra).
Het gaat om twee aspecten.
1 een ‘mooie’ grafische weergave van de meterstanden en vooral het actuele verbruik cq. teruglevering.
2. Management van verbruikscentra om inzicht te krijgen inneemt verbruik in relatie tot (terug)levering.
Support van slimme meters is op dit moment beperkt. Door gebruik te maken van de Dutch Smart Meter plugin en een Multi Value control in HomeWave kan je 3 waarden uit je meter laten zien. Er is nog geen mooi vormgegeven metertje of grafische weergave van historische data.
Hi
Are you planning to integrate geoscenes?
So if my phone is near .. For example my house
I can trigger something?
Regards
Martijn
This is planned, but not in the next release.
I get a message that says “can’t configure device, link this control to a z-wave device first.” I’m not sure what that means..
Hi Ronald
I have been trying, unsuccessfully, of adding a third vera using version 1.90.
Although I have added all three veras to the vera tab… I can’t seem to access the objects on the third vera.
Also have difficulty in finding any instructions regarding 1.90
Jack
Hi Jack, try and re-link that control to a device on your 3rd Vera: highlight the control and click the Link (chain) button. Refresh the list, then select the right device from the list. If that doesn;t help, please delete the 3rd Vera from Settings and add it again.
I have been using HomeWave to control my Vera for a while now, and it has been great. I’ve just added a Vera3 to a 2nd home and would like to use HomeWave to control this device as well. I found the settings to add IP address, etc. for second vera, but couldn’t find any instructions for how to add controls for devices from multiple Veras. Any pointers?
Simply add a new control and browse the list of devices; this should show the devices for both Veras. Use the Refresh button if necessary